Radar motion detection sensor
€80.00
Tax included
Motion alarm in radar technology. An active sensor for the whole room that can be mounted behind furniture.
The sensitivity of the sensor can be adjusted directly on the sensor and checked with a built-in LED.
Pulsed transmission power of only 0.02 watts, about one hundredth of a cell phone.
Radar Motion Sensor 10.525 GHz
Vertical Beam Width: 36 degrees
Horizontal Beam Width: 72 degrees
Detection Distance: 2-16m
Emission: 0.02 Watt pulsed 5 uSec
Sensitivity Adjustment inside (Std. Minimum)
Normally passive infrator detectors are used for motion detection. These are cheap but error-prone and work with increasing ambient temperature worse and worse until eventually no longer.
This motion detector works with radar technology. A weak 10 GHz signal is emitted and its echo is measured. If something moves in the room, the echo is slightly changed and the alarm is triggered.
The great advantage of radar technology is that it is an active sensor, i.e. it picks up the signal emitted by itself. This means that it works at any temperature and false alarms caused by sunlight, as is possible with IR sensors, are thus excluded.
The radiation even penetrates wooden furniture so that a burglary is noticed even without direct visual contact to the sensor.
The radiation is harmless to health, this technology is used in professional door openers in every department store.
RADAR100BSG
Motion alarm in radar technology. An active sensor for the whole room that can be mounted behind furniture.
The sensitivity of the sensor can be adjusted directly on the sensor and checked with a built-in LED.
Pulsed transmission power of only 0.02 watts, about one hundredth of a cell phone.
Radar Motion Sensor 10.525 GHz
Vertical Beam Width: 36 degrees
Horizontal Beam Width: 72 degrees
Detection Distance: 2-16m
Emission: 0.02 Watt pulsed 5 uSec
Sensitivity Adjustment inside (Std. Minimum)